The Île-de-France transport network regularly reports more than a hundred disruptions a day, including scheduled works, technical incidents and cancelled services. Knowing how to check RATP traffic in real time in Paris involves more than opening an app: the reliability of the information depends on what you check, when you check it, and whether you can distinguish updated data from scheduled times.
Real-time data and scheduled times: two different types of information
A common pitfall is to treat every time shown in an app as up to date. When an upcoming service is labelled “scheduled time” rather than “real time,” it reflects the theoretical timetable, not the situation on the ground. This difference directly affects whether you decide to leave or wait.
Transport updates can report delays, cancellations or stops that are not being served. But a service shown at its scheduled time does not reflect any of these changes. In apps such as Bonjour RATP or Île-de-France Mobilités, check the label next to each time before relying on the stated wait time.
To follow RATP traffic in real time in Paris, you therefore need to distinguish between two layers of information: the overall status of the line (normal, disrupted or suspended service) and the next services, recalculated based on actual conditions.

Comparing RATP and Île-de-France traffic monitoring tools
Several platforms are available, each with a different scope and update frequency. The table below summarises the differences between the main tools.
| Tool | Coverage | Alert type | Key feature |
|---|---|---|---|
| Bonjour RATP | RATP metro, RER, tram and bus | Custom notifications by line, day and time slot | Alerts can be configured for specific travel days and times |
| Île-de-France Mobilités (app) | Metro, RER, Transilien, tram and bus | Notifications by line | Also covers Transilien and networks outside the RATP system |
| Paris Mobilités (website) | Entire Île-de-France network | Online updates | Updated every three minutes |
| Ma Ligne | Metro (1 to 14), RER (A to E), Transilien | Subscription-based notifications | Interface focused on favourite lines |
| SNCF Connect / Transilien.com | Transilien, RER (SNCF-operated sections) | Alerts by line and station | Complements other tools for SNCF-operated RER sections |
The right tool depends on the network you use. The RER is jointly operated by RATP and SNCF, so you may sometimes need to check two sources to get a complete picture of the same line.
Update delays and practical implications
Paris Mobilités states that disruption information is updated every three minutes. However, an alert may remain visible until the announced end time, even if service resumes earlier. This creates a discrepancy: a line listed as disrupted may already be running normally when you check it.
To avoid this, check upcoming services as well as the line status, especially towards the end of an incident. If departures reappear in real time at regular intervals, the disruption has probably been resolved.
Custom alerts: set them up instead of checking manually
Manually checking the network before every journey is still the most common approach. Custom alerts turn this around: the information comes to you when you need it.
The Bonjour RATP app lets you select favourite lines, then set time slots and days of the week for receiving notifications. It covers the RATP network’s metro, RER, tram and bus services.
The Île-de-France Mobilités app works in much the same way, but covers a wider area. Notifications include Transilien and bus lines outside the RATP network. For passengers who combine the metro with suburban trains, this broader coverage means they do not have to switch between two apps.
- In Bonjour RATP: select your lines, choose the days (weekdays or weekends) and time slots, then enable push notifications
- In Île-de-France Mobilités: subscribe to lines in the “My lines” section to receive disruption alerts
- In SNCF Connect or on Transilien.com: set up alerts by line and station, which is useful for SNCF-operated RER sections

A line showing normal service: what this does not guarantee
A “normal service” status on a metro or RER line means trains are running according to the planned timetable. This status does not cover station facilities (lifts, escalators) or temporary entrance closures.
For a journey that requires specific accessibility arrangements or a tight connection, the status of facilities and stations is a separate piece of information. The Bonjour RATP and Île-de-France Mobilités apps display these two types of data separately.
Open data and alternative tools
Île-de-France Mobilités’ PRIM platform provides open data on departures and disruptions. Developers use it to create custom monitoring tools, such as smart-home integrations or real-time maps tracking trains, metros, trams and buses.
These tools are intended for a technical audience, but their existence highlights an important point: raw network data is available beyond the official apps. Anyone looking to automate monitoring of their usual lines can use these feeds without relying solely on notifications from consumer apps.
Monitoring the Île-de-France network is more reliable when you cross-check at least two sources and distinguish between the line status, recalculated upcoming services and the status of station facilities. Three distinct layers of information, rarely brought together on a single screen.



