We’ve all been there: it’s 8 p.m., the costume party is tomorrow, and nobody thought about what to wear. With a closet, a few basic supplies, and an hour to spare, you can put together a clown costume that works without a trip to the store. A homemade clown costume comes down to three essentials (oversized clothes, DIY accessories, and suitable makeup), and you can adapt each one using whatever you have on hand.
Clown makeup safety: what the label doesn’t always tell you
Before we get into colors and fabrics, there’s one important point to cover. Craft paints sold in big-box stores are not cosmetics. A product labeled “non-toxic” or “hypoallergenic” isn’t necessarily formulated for use on the face, let alone around a child’s eyes or lips.
For clown makeup, choose a cosmetic product designed for use on facial skin. Party makeup palettes sold at pharmacies or in the cosmetics aisle display a batch number and an INCI ingredient list—two reliable indicators. Even with a suitable product, a reaction (redness, itching) is still possible, so test it on a small area of the wrist the day before.
Apply the clown’s opaque white base with your finger or a damp sponge. Then use a fine brush to draw on the red nose and exaggerated eyebrows. At the end of the evening, warm water and mild soap are enough to remove the makeup.
To complete the costume with other circus-inspired elements, a homemade clown costume can also include ringmaster or acrobat accessories, depending on what you feel like wearing.

Clown costume using clothes from your closet
The idea behind a clown costume is to go over the top: too big, too colorful, too mismatched to be real. Start with a pair of loose-fitting pants (a parent’s pair for a child, or old pajama pants for an adult). Hold them up with visible suspenders or a belt tied over the top.
Tops and layers
An oversized plaid shirt, a mismatched knitted vest, a striped T-shirt: the idea is to layer two or three pieces with clashing patterns. Bright colors (red, yellow, green) set the tone, but a black-and-white clown works for Halloween, too.
Sew or hot-glue a few large, colorful buttons onto the front of the top. Wool pom-poms, easy to make by wrapping yarn around a piece of cardboard, can stand in for buttons if you don’t have any on hand.
Adjusting the fit without a sewing machine
No elaborate sewing alterations needed. Rolled hems secured with safety pins are enough to shorten pants that are too long. Safety pins are the key tool for a quick clown costume. They hold up suspenders, adjust the waist, and attach accessories without damaging the fabric.

DIY clown accessories: nose, hat, and shoes
Accessories make the difference between a makeshift costume and one that really works. You can make these three items in just a few minutes.
Make a red nose without buying one
Paint half a ping-pong ball with red nail polish, then poke two small holes in the sides to thread a thin elastic through, and you’ll have a sturdy clown nose. If you don’t have a ball, a piece of lightweight cardboard cut into a circle, shaped by hand into a dome, and painted will do the trick. For the quickest option, simply apply a red circle with your finger using makeup.
Pointed cardboard hat
Roll a sheet of colored cardstock into a cone, secure it with tape, and fasten it under the chin with an elastic. Glue a wool pom-pom to the top. The whole thing takes less than ten minutes.
Oversized shoes
Use a pair of adult shoes for a child, or rubber boots two sizes too big for an adult. Decorate them with colored tape or acrylic paint. For paper shoes (purely decorative), cut two pieces of thick cardboard into giant sole shapes and attach them to real shoes with elastic bands.
- A giant bow tie cut from corrugated cardboard and painted makes a great substitute for a store-bought accessory. Attach it to the collar with a safety pin.
- Fold crepe paper accordion-style and staple it in the middle to make a flower, then tuck it into the breast pocket for a “squirting flower” effect.
- Complete the look with suspenders made from two strips of elastic fabric (salvaged from an old fitted sheet) and sewn onto the pants with large stitches.

Clown costumes for kids and adults: tailor the outfit to the occasion
For a carnival or school party, go for bold colors, light makeup (just a red nose and two eyebrow strokes), and a costume the child can run around in. Make sure the costume doesn’t drag on the ground and the hat doesn’t block their vision to avoid most mishaps.
For Halloween, change things up. A clown dressed in black, white, and red, with more dramatic makeup (drawn-on dark circles and an exaggerated smile in black pencil), becomes a creepy clown without any extra supplies. The same loose-fitting pants and oversized shirt will work; only the color palette changes.
Adults can play up the mismatched look with finds from thrift stores: an oversized business suit, a loud patterned tie, and visible mismatched socks are all you need for an elegantly absurd clown. Add a wig (a beanie covered with colorful yarn strands attached with hot glue) to complete the character.
Flames and fabrics: a simple precaution
A homemade costume made from synthetic fabric, crepe paper, or cardboard is still flammable. Keep wigs and decorations away from candles, and opt for LED candles if the party uses them. For an outdoor outing after dark, stick a strip of reflective tape to the back of the costume so your child can be seen without spoiling the look.
A homemade clown costume doesn’t require a budget or any special skills. A pair of oversized pants, three cardboard accessories, and cosmetic makeup suitable for the face—and the costume is ready, without needing an express delivery from the store.



